Rubber Coated Nylon Strap with Pull the Dot Snap (PTD)
Shock Cord Retainers
Modular Mounting Placard
MPS Compatible (Coming Soon)
Tactical Tailor MALICE Clips
WARFYTR Cinch Hooks
G-Code RTI (#33,#34,and #35)
Safariland MLS, and ELS
Install your radio by presenting the bottom of your battery to the topmost shock cord retainers and sliding it in that first loop. Push the radio down to the bottom most loop (be careful of shock cord pinching buttons) and make sure the cord is centered on the radio. Then rock the radio back and forward a little to seat the radio in it's position.
Close the RACC by folding the front half toward the back and secure it by finding the rubber coated strap and PTD snap. Pull the Dot snaps are meant to be released one way and clasped one way. Start the snap on the top of the receiver and rotate downward to secure the snap.
Open the RACC by lifting up on the PTD snap and then open the front half to your desired position.
Adjust the hinge by tightening or loosening the midpoint Phillips drive screw on the inside of the front shell.