BTECH Mobile UV-50X2 50 Watt Dual Band Base, Mobile Radio: VHF, UHF Ham (Amateur)
Baofeng Tech
$199.89
(No reviews yet)
Write a Review
Baofeng Tech
BTECH Mobile UV-50X2 50 Watt Dual Band Base, Mobile Radio: VHF, UHF Ham (Amateur)
The X-Series Mobiles come with a fully customizable Multi-Color LCD display screen, allowing You can adjust the display to be exactly the way you want it. Now, you can fully customize your channels to display their alpha-numeric names or frequency settings.
With 200 programmable memory channels, you can add or remove channels from scanning list, give channels alphanumeric names, and easily program the UV-50x2 from a PC! Have your radio operate exactly as you need it. The PC04 FTDI Cable is recommended for easier computer programming.
The UV-50X2 operates as multiple radios in one, with either 144 MHz or 430 MHz as the ‘Main’ TX/RX band, while simultaneously watching up to 3 other frequencies or channels. You can configure your UV-50X2 for simultaneous VHF-VHF or UHF-UHF operation!
Technical Details
- FM: 87.5-108 MHz
- VHF: 136-174 MHz
- UHF: 400-520 MHz
- Channels: 200
- Loud 2W Speaker
- Size: 5.7 (w) x 1.85 (h) x 7.5 (d) in
- Weight: 2.65lb
BTECH Radios are Designed in the USA
BTECH Radios are not like other similar looking radios. BTECH radios are designed in the USA with custom firmware and internal hardware differences. BTECH radios are backed with a full US warranty and support. A BTECH label means you are getting the best radio available! A few of our differences are below:
- BTECH radios use an upgraded Power Chipset (other radios use a smaller incorrectly sized final that will burn out over time)
- Dual Synchronize Display Mode: Synchronize Up to 2 Channels – and display both their channel name and channel frequency!
- Microphone Audio Gain Settings: Sound great and customize your microphone output for any repeater
- Expanded Frequency Range (up to 520MHz)
- Auto Power Off Function: Save your battery and prevent unnecessary power draining
- Channel Mode Editing Settings: Edit saved memory channels on-the-fly; our firmware does not require you to delete a channel to make changes
- New Scanning Modes: Auto Scan (Scan with a power reboot), Scanning Resume, and Variable Frequency Scanning
- Quad Watch Delay Time: Allows the receiver to stay on the secondary channel longer after incoming transmission – customize the delay up to 50 seconds; This avoids manually channel switching when you are engaged with simultaneous contacts on two frequencies
- Randomization Privacy Mode
